background image

INTRODUCTION

FEATURES 

Upper reinforcing piece
in  each  section  to 
avoid deformations with 
high loads.

Horizontal support for elevating loads purpose.

Double blocking 
system:
- For transportation
  (upper pin bolt )
- Folfing/unfolding 
  (lower pin bolt).

This  system  uses  a  profile  especially 
designed  to  heavy  loads.  the  width  of 
these  profiles  and  the  wall  thickness, 
ensure a great firmness of the assembly. 
They incorporate a lane with fixing holes 
which  houses  safety  pins.  these  holes 
are  large  enough  so  that  the  pins 
introduced  easily  and  quickly  providing 
a fast deployment of the tower.

Safety pins have been oversized, 
both in diameter as the piston as
the main safety part. the lock/unlock
system is performed exerting a 
small flip and rotate, allowing this 
operation so simple and complete 
security.

FEATURES 

FASTENER SYSTEM

LW 461R / LW 476R LIFTERS

LW 461R / LW 476R LIFTERS

- 1 -

- 2 -

USING & INSTALLATION USER MANUAL

USING & INSTALLATION USER MANUAL

 As usual in 

WORK®

 products, all the components have been oversized with the goal of achieving a 

superior security:

 - Strong cable of security made of steel under the DIN

400 series

 has been a big change in the way of work when professionals needs to lift heavy 

loads. The big success resides in the loading at the ground level avoiding unnecessary efforts 
that before can not be solved easily. 

- High resistance aluminium profiles.
- Powerful autoblocking bolts.
- Steel made pulleys.
- Autoblocking certified winches.

- 2 iron braces placed in the back side to reinforce.
- Bubble level indicator vial
- High resistance legs.

 normative 

The transport of both tower models, can be converted in a very simple operation due to the wheels placed on 
the both towers base and two additional wheels with a big size and folding to the body of the tower which 
always solve the uncomfortable operation of managing the tower loading up or getting ot from a lorry or track.
LW476 & 461 towers have the best features to get lifted the most complicated loads. Their materials, made of 
steel, assure to the user the security and reliability without renouncing to the comfort and easy use.

For the transport, LW 461R and
LW 476R incorporate a folded wheel system

or hits.

With this system, is posible to make more easy 
the transport process in a lorry or track, the wheel
allow to lean the tower over the lorry base and to 
displace it So the winch does not suffer scratches 

and mast provide an extra firmness

Additional wheels for an easy load up or get  
down process from a lorry or track.

The pulley system (which raised or lowered each profile), 
is responsible for transmitting the stress generated in the 
winch and raise each section, for this reason, these pulleys 
have a proper design to handle the wire, covering the 
entire system in a compact assembly.

ATTENTION !!!

For added security during transport, these towers
incorporate a locking system that prevents the movement
of the profiles. This bolt, which is placed in the most external
profile, MUST BE UNBLOCKED BEFORE unfolding the
lifter.

Summary of Contents for LW 461R













Reviews: