LW 461R / LW 476R LIFTERS
LW 461R / LW 476R LIFTERS
- 13 -
- 14 -
USING & INSTALLATION USER MANUAL
USING & INSTALLATION USER MANUAL
BGV C1 REGULATION, Explanation
BGV C1
is a regulation for Staging and Production Facilities for the
Entertainment Industry. Lifting and rigging equipment is just part of this
standard and cover structures and other technical matters.
Adopting
BGV C1
is entirely voluntary (except in Germany) but its adoption is
generally required by insurance companies and therefore it has effectively
become an industry standard.
The application of this standard over lifting towers is vital due
to in theatres, stages, etc. are used to move loads over performers
and, in some cases, above spectators, representing a potential falling risk.
BGV C1 REGULATION, Application fields
This standard is orientated in two ways:
By one side, the lifting towers adopt designs and materials in order to
achieve a high security degree in magnitudes like load supported,
balance, friction resistance, etc.
So a
WORK
®
lifting tower
BGV C1
certified ensures the customer
that has passed strict test during its design, materials choice or
load and effort verifications.
By other side, in order to achieve an optimum operation with these
units, is recommended as much a responsible use of the unit,
complying basic rules like maximum load accepted or tower balance
as maintenance periodic, which must be carried by expert technicians,
checking the good state of the steel cable and winch, operation of
the safety bolts and folding/unfolding of the entire profile system.
WORK®
LW 415 R
WORK®
LW 425 R
WORK®
LW 461 R
WORK®
LW 476 R
CONFORMITY DECLARATION
The described Truss-Lifts meets all the requirements specified in the Directive 2006/42/EC
Applicant :
EQUIPSON, S.A
Address :
Avda. El Saler, 14 Pol. Industrial L´Alteró
46460 SILLA - Valencia (Spain)
Representative :
EQUIPSON, S.A
Address :
Avda. El Saler, 14 Pol. Industrial L´Alteró
46460 SILLA - Valencia (Spain)
(Product Manager)
October 22, 2009
The test report was carried out from the submitted type-samples of a product in
conformity with the specification of the respective standards. The certificate holder has
the right to fix the CE-mark on the product complying with the inspection samples.
Juan José Vila
Description :
of the European Parliament and the Council of 17 May 2006 on machinery, and
amending Directive 95/16/EC.
Lifts for Truss Systems
