Controls & Functions:
FRONT
SIDE
REAR
SIDE
1 2 3 4
5 6 7 8 9 10 11
1. Power LED
: This LED in red color, will iluminate when there is power currently being
supplied to the unit.
2. LINK LED
: This yellow LED in on when the Ethernet LAN port is connected to the network.
3. DATA LED
: This green LED blinks when the Ethernet port is transmitting the data.
4. DMX 1-8 LEDs
: This blue LEDs blinks when the output is working fine. In the LEDs are ON,
the output disable.
5. Subnet selector
: In ArtNet, dispswitch 0-F allow to select the Subnet, with the value from 0
to F (16 positions)
6. UNIV selector
: Allows to select one of the 16 DMX universes in the configured Subnet.
7. LAN
: RJ 45 connector which allows to connect to the network.
8. DMX Outputs
: These XLR connectors send the converted DMX signal to a control line with
compatible DMX devices like moving heads, scanners, RGB drivers, etc.
9. Fuse
: F3.15A, 250V, 50/60 Hz
10. Power input
: AC 96-264 V 50/60 Hz.
11. Power Switch
: This is the main power switch and turns power on and off.
Universe setup:
- Select with the switch
(5)
, the Subnet.
- Select the first universe with the switch
(6)
. This universe will be output 1 and, the following
universe will be output 2 and sucessively.
EN
DMXnet 8 - 2 -
User Manual/Manual de Uso
