ELECTRIC MIXER
INTENDED USE
The stirrer is intended for stirring of powdery building materials such as mortar, plaster, adhesive as well as solvent-free paints,
lacquer and similar substances.
Do not use for drilling.
The user bears sole responsibility for any damage caused by inappropriate use.
Generally accepted accident prevention regulations and the enclosed safety information must be observed.
TECHNICAL SPECIFICATIONS (see fig 1)
Model
EM16-140 (ST-1600)
Chuck thread diameter
M14
Voltage
230V~,50Hz
Insulation class
II
Input power
1600W
Declared sound pressure level
L
pA
: 90,1dB(A), K=3dB(A)
Speed
I:180-400/min
Declared sound power level
L
wA
: 101,1dB(A), K=3dB(A)
II:300-700/min
Vibration
a
h
≤
2,5m/s
2
, K=1.5m/s
2
Mixer head
Ø140mm
Weight (without battery)
5.7kg
●
NOISE/VIBRATION INFORMATION
The vibration level given in this information sheet has been measured in accordance with a standardised test given in EN
62841 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is poorly maintained, the vibration emission may differ. This may
significantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when
it is running but not actually doing the job. This may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work patterns.
EXPLANATION OF SYMBOLS
Attention!
Pull out mains plug immediately, if the mains
cable is damaged, entangled or severed.
Always remove the mains plug before working
on the device.
Read the manual.
Wear ear protection.
Wear eye protection
Wear breathing protection
Electrical appliances must not be disposed of
with the domestic waste.
Protection class II
PRODUCT ELEMENTS (see fig 2)
1
Right handle
8
Plug
2
Left handle
9
Speed adjustment wheel
3
Gear box
10
Switch trigger
4
Chuck
11
Lock-off safety button
5
Mix rod
12
Open-ended wrench
6
Mix head
13
I/II speed select knob
7
Cable
14
Carbon brush cap
SAFETY
General Power Tool Safety Warnings
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your
mainsoperated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
● Keep work area clean and well lit. Cluttered or dark
areasinvite accidents.
● Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases
ordust. Power tools create sparks which may ignite the
dust or fumes.
● Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
Electrical safety
●
Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
