Worcraft PROFESSIONAL CMS-S20Li, Instruction Manual

Page: 60 / 75

Cordless Mitre Saw
INTENDED USE
The power tool is intended as a stationary machine for making straight cuts in wood with and against the grain. It is possible to
cut mitre angles of -
48° to +48° and bevel angles of 0° to 45°.
The power tool is designed with sufficient capacity for sawing hardwood and softwood.
This power tool is not suitable for sawing aluminium or other non-ferrous metals.
TECHNICAL SPECIFICATIONS
Model CMS-S20Li (J0G-ZP8-210Li) Straight cut at 0
0
x 0
0
200x51mm
Rated voltage 20VDC Mitre cut at 45
0
x 0
0
152x51mm
No-load speed 3600 /min Bevel cut at 0 x 45
0
200 x 35mm
Blade size
Ø185mmxØ30mmx40T
Combined mitre cut at 45
0
x 45
0
152 x 35mm
Laser type Class II Sound Pressure Level LpA=92 dB(A) K=3dB(A)
Angle of mittre table -45
0
/0
0
/ +45
0
Sound Power Level LwA=101dB(A) K=3dB(A)
Bevel cutting angles 45
0
to the left Vibration Level <2.5m/s
2
, K=1.5m/s
●
NOISE/VIBRATION INFORMATION
The vibration level given in this information sheet has been measured in accordance with a standardised test given in EN
62841 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is poorly maintained, the vibration emission may differ. This may
significantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when
it is running but not actually doing the job. This may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work patterns.
EXPLANATION OF SYMBOLS
Attention! Always remove the battery pack before do any
adjustment or maintainence on the device.
Read the manual.
Wear hearing protection. Exposure to
noise can cause hearing loss.
Wear safety goggles. Wear a dust mask.
Keep hands away from the cutting area
while the power tool is running. Contact
with the saw blade can lead to injuries. Danger zone Keep hands, fingers and
arms away from this area.
Laser radiation
Do not stare into the beam
Laser class 2 Electrical appliances must not be disposed of with
the domestic waste.
PRODUCT ELEMENTS (Fig 1 & 2)
1 Dust bag 11 Mitre table 21 Guard retraction arm
2 Upper fixed blade guard 12 G clamp assembly 22 Sliding arm locking knob
3 Laser head 13 Slide bar 23 6mm hex key
4 Operation handle 14 Bevel scale 24 Bevel locking knob
5 Rotating blade guard 15 On/off switch trigger 25 0
0
bevel adjustment screw
6 Table fence 16 Switch lock 26 Mounting holes
7 Table insert (kerf plate) 17 Battery compartment 27 Clamp assembly lock screw
8 Mitre lock 18 Trenching depth lock nut 28 Release knob
9 Mitre lock release latch 19 Setting screw 29 Spindle lock
10 Mitre scale 20 Dust extraction port 30 Laser switch
SAFETY