User manual
Hoof trimmingcrush:SA0051/SA0051B
Version: 21-02-17
Page 24 of 33
6. Maintenance
CAUTION!
Always disconnect the machine from the power supply by pulling out the plug.
Where a hydraulic accumulator is present this must be depressurised.
Test the installation on completion of maintenance work or repairs to ensure that it
can be used again safely.
Only trained technical personnel may carry out the maintenance activities
described or repair work.
6.1. Maintenance diagram
The diagram below shows the maintenance activities to be carried out.
Activity
note
D
a
il
y
w
e
e
k
ly
Ev
e
ry
1
0
0
a
n
im
a
ls
A
n
n
u
a
ll
y
Ev
e
ry
2
y
e
a
rs
See
Section
General
Check on panic locks and
hooks.
Renew where damage is visible.
Check ropes and chains.
Renew where damage is visible.
Check plugs, cables, controls
and connections.
Alert a competent fitter where
damage is visible.
Cleaning
Clean the machine.
6.2
Lubrication
Grease nipples on rear gate
sliding section.
Bearing grease.
6.3
Other grease nipples.
Bearing grease.
Hydraulic installation
Check the oil level.
Checks must be carried out after 500
cows or where leakage occurs.
6.5
Replace oil and filter.
Axle and wheels
Check play in the wheels.
6.6
Check the tyre profile.
Have this inspected by a competent
person.
Check the tyre pressures.
Have this inspected by a competent
person.
Check the adjustment of the
brakes.
Have this inspected by a competent
person.
6.4
