Woosim Systems WSP-R240, Operator'S Manual

Page: 19 / 27

WSP-R240 Rev. 6.1
http://www.woosim.com
19

When you press FEED Button once again, Power Lamp flickers 5 times
and Error Lamp flickers once.
 Press POWER Button once, Error Lamp flickers twice.
And then the density has set to 2 stop bit .

When you press FEED Button once again, Power Lamp flickers 6 times
and Error Lamp flickers once.
 Press POWER Button twice, Error Lamp flickers 3 times.
And then the density has set to Density high .

When you press FEED Button once again, Power Lamp flickers 7 times
and Error Lamp flickers twice.
 Press POWER Button once, Error Lamp flickers once
And then the mark has set to Mark no use .

When you press FEED Button once again, Power Lamp flickers 8 times
and Error Lamp flickers once.
 Press POWER Button once, Error Lamp flickers twice
And then the sensor has set to Sensor medium1 .

When you press FEED Button once again, Power Lamp flickers 9 times
and Error Lamp flickers five times.
 Press POWER Button once, Error Lamp flickers once
And then the power down has set to Power down no use .
If all the mode have set, press the
POWER Button and the FEED Button at the same time
after then release the buttons at the same time.
The printer will print out the mode status which has modified.
(Bluetooth / 57600 bps / 7 data bit / Odd parity / 2 stop bit / Density high /
Mark no use / Sensor medium1 / Power down no use)
If the status is not correct, please try it again according to the procedure.