9
Unpacking:
Two people are required to unpack the bike.
Stand the carton upright as shown.
Remove the shipping straps, cut the tape seals and then remove all of the polystyrene packaging.
Keep the carton/bike in the upright position, and then lift the bike out of the carton and place it on a sturdy
surface.
DO NOT
destroy the carton as it will be required if the bike needs to be returned for any reason in
the future.
Once you have the bike out of the box, remove all of the remaining packaging and detach the pedals, light
and charger box from the frame. This model comes almost fully assembled meaning that there is very little
to do to complete the assembly of the bike. Firstly, slide the handlebars into the frame but don’t fully
tighten them or worry about positioning just yet, this step is just to ensure that the handlebars are out of
the way and don’t scratch the frame while completing the other steps.
Now unfold the bike and engage the clamp. There are two parts to the clamp, the clamp itself and the ad-
ditional locking piece—the photos below shows how the clamp is used. The left picture show the clamp in
the open position, you can fold the bike when the clamp is in this position. The second photo shows the
clamp when closed and locked in place, the black locking piece should be down to secure the clamp in the
closed position.
You may find that the cables from the handlebar components are detached when you receive the bike. If
this is the case, line up the arrows on the connectors and re-attach them to their corresponding coloured
connector.
