Part Number WW-700-34
b
y
tre
espan
for
arb
or
is
ts
b
y
tre
espan
for
arb
or
is
ts
14.
The photo opposite shows the correct working line
orientation through the lowering device fairleads and
around the lowering bollard. The lowering bollard is de-
signed to take larger shock loads than the winch drum
and must be used when dynamically lowering large sec-
tions of timber. Never lower directly off the bollard fair
leads, these are designed for line orientation only. The
line must run at least 1 half a wrap around the bollard
drum before lowering.
When using the lowering device bollard the working line
can be wrapped in either clockwise or anti clockwise
direction. Make sure the line exits on one of the four low-
ering bollard fairleads.
When using the winch the line can ONLY be wrapped in
a clockwise direction and when exiting the winch
ONLY the horizontal failrleads can be used.
Winch, Lowering Device Instructions
