Part Number WW-700-34
b
y
tre
espan
for
arb
or
is
ts
WARNING
Activities using this type of equipment are inherently dangerous. It is not possible to cover every eventuality
relating to the use of this equipment. Purchasers and users of Woody’s Winch devices should seek
professional training from a fully qualified and competent instructor prior to engaging in any activity.
If you are not able, or not in a position to assume this responsibility,
do not use this product.
The manufacturer its distributors and retailers do not accept any liability if users do not follow the instructions
correctly. Only the techniques shown in the diagrams are authorised. Any other use deviating from those
shown may result in serious injury or death.
Prior to each use a complete risk assessment must be carried out to ascertain that the device chosen
configures with and is appropriate to the work being undertaken. The Woody’s Winch device chosen must
also be compatible with all the other components within the rigging system.
Users must always ensure that all components of the work system are suitable for the foreseeable loadings
that may be applied during use. Poor technique and shock loading may cause catastrophic failure of this
equipment and should be avoided.
Where a failure of the product may occur a suitable backup system must be installed and used. All
components of the system used with the device must be inspected before and after each lowering/lifting
operation.
Retire the Woody’s Winch device from use if there are any tactile or visual signs of wear or damage. The
retention devices must also be inspected & checked for both tension and wear after each lowering or lifting
operation to ensure they are securely attached to the Woody’s Winch device and the mounting point.
The Woody’s Winch lowering bollard should only ever be used with the correct diameter of rope, You must
never exceed the recommended maximum diameters. Each device has a Working Load Limit (WLL) – This is
the maximum load allowed to be applied to the device either for lifting or lowering above which catastrophic
failure will occur. These values are based on a vertical load being applied and used as specified within these
instructions.
Although these devices have been issued with a Working Load Limit (WLL) it is your responsibility to ensure
that all the components used in conjunction with the device are matched equally with their Working Load
Limit (WLL) or Safety Factor (SF) or Safe Working Load (SWL). If you are unsure on a products individual
specifications you should contact the manufacturer. You should never exceed the lowest rated section or
component within a rigging system. When calculating any rigging system the strength of the anchor and
attachment points must also be taken into account.
•
The Woody’s Winch devices must never be used for lifting or lowering people. They are not intended
or rated for use as Personal Protective Equipment. (PPE)
•
Always keep body parts, loose clothing, and debris away from the device when in use.
•
Always use appropriate hand protection when operating the device.
•
When holding the working line NEVER wrap the line around your hands or other body parts. Always
ensure it can run freely in case you need to release the line in an emergency.
•
Do not stand or allow others to stand directly under the load being lowered or under the work being
performed above. Ensure users and other persons are working and operating the device from a safe
distance.
•
Any potential shock loading must always be kept to an absolute minimum when using the Woody’s
Winch device as with all rigging equipment.
•
All connecting devices or components must be retired from use if they are subjected to impact
loading.
•
To avoid damage to the device you must
minimise all if any free fall distance
.
•
Always maintain control of any lowered load.
