EXENSE & EXENSE AIR- user manual
10
ENG
2- BEFORE USING
EXENSE / EXENSE AIR must be assembled by a qualified paragliding pro
-
fessional, such as your instructor. More specifically, great care has to be
dedicated to inserting the reserve parachute into the harness in the correct
way. Only after this has been performed should the pilot adjust the harness
for maximum comfort.
2.0.1 - Assembling the dorsal protection for EXENSE
Woody Valley recommends that assembly should be performed in the se-
quence detailed below. In case of doubts or any other problems regarding
this procedure, please consult your instructor, your Woody Valley retailer,
or the importer.
Normally the product is supplied with separate dorsal protection, rolled and
packed separately. In this case, follow these steps for its installation
a. Remove the protection from its packaging (once it has been remo-
ved from its packaging, it may take about 2 hours to return to its normal
shape)
b. Open the zip inside the rear harness pocket
c. Insert the foam protection, which will automatically fit into the cor
-
rect position
Do not place the foam protection below the cross-buckles on the back of
the harness.
Should it be necessary to remove the protection, just extract it following
the steps described in point “b” above.
Summary of Contents for exense
Page 1: ......
Page 2: ......
Page 27: ...EXENSE EXENSE AIR user manual 26 ENG 8 CERTIFICATES OF APPROVAL...
