Maintenance and Cleaning
32
Woodway PPS Series Accessories / Fall Protection Operating Instructions
12/2015
7.2
Maintenance Intervals
The PPS fall protection system service life is substantially influenced by handling.
Frequent use reduces the service life as well as improper handling or faulty mainte-
nance. To ensure safe operation a visual and functions test must be performed at
least annually.
All maintenance work must be carried out by appropriate qualified personnel. If the
PPS fall protection system is not properly maintained, safe use can no longer be
guaranteed. Wear, damage or loose connecting elements cannot be detected.
The specified maintenance intervals or the replacement of parts specified by the
manufacturer must be carried out earlier if there are signs of wear.
For proper inspection and regular review, we recommend a WOODWAY mainte-
nance contract.
ATTENTION
Worn or damaged components must be replaced immediately. If the observed
deficiency can cause danger to the user or operator, it may not be used until
it has been repaired.
7.2.1
Daily Maintenance
•
All cable guides, pulleys and the return stop should be checked before the dai-
ly use.
•
All knots and rope connections are to be checked.
•
The emergency stop functions should be checked each day before use. For
this, pull the pull rope while the treadmill is running until the pull switch is
triggered.
7.2.2
Weekly Maintenance
•
Check the rope for wear
•
Control of the suspension rollers
•
Check all pulleys for damage or wear
•
Check all safety-relevant screw connections
•
Cleaning and disinfection
7.2.3
Annual Maintenance
•
Maintenance / inspection of the entire system (treadmill and fall protection
system) by WOODWAY employees or authorized personnel.
