Transportation and Storage
18
Woodway PPS Series Accessories / Fall Protection Operating Instructions
12/2015
4
Transportation and Storage
4.1
Safety Notices for Transportation
Check the PPS fall protection system for damage upon arrival. Also check and com-
pare supplied accessories with the corresponding delivery note.
The manufacturer is not liable for damages and missing parts if this information was
not recorded in writing on the delivery note upon delivery of the unit. Damage or
defects must be reported to the carrier and to the responsible WOODWAY dealer
immediately.
WARNING
Risk of Injury by Machine Falling Over!
Improper transportation of the device may lead to it falling over and causing
injury or equipment damage.
►
Only transport in compliance with the safety regulations.
►
Carry the device components with at least two persons.
►
Ensure stable center of gravity and steadiness in all described modes of
transportation.
If necessary, transport or relocation can be carried out by authorized WOODWAY
service partners.
For further information please contact WOODWAY customer service.
4.2
Storage
The device may only be stored in closed, dry rooms. It is absolutely necessary to
prevent contact with moisture (rain, fog, etc.)
The following environmental conditions are prescribed for transportation and stor-
age:
•
Temperature:
-10°C to +50°C
•
Atmospheric pressure:
800 to 1050 hPa
•
Relative humidity:
10 - 90% (not condensed)
WOODWAY Service:
