ProAct III/IV Actuator/Driver Specifications
Driver Part Numbers
9905-384
Model III (conduit), 4–20 mA input
9905-385
Model III (conduit), 0–200 mA input
9905-386
Model III (MS connector), 4–20 mA input
9905-387
Model III (MS connector), 0–200 mA input
9905-388
Model IV (conduit), 4–20 mA input
9905-389
Model IV (conduit), 0–200 mA input
9905-390
Model IV (MS connector), 4–20 mA input
9905-391
Model IV (MS connector), 0–200 mA input
9905-392*
Model III (MS connector), 0–200 mA input
9905-459*
Model III (MS connector), 4–20 mA input
9905-460*
Model IV (MS connector), 0–200 mA input
9905-461*
Model IV (MS connector), 4–20 mA input
*—These four models have an additional 4-20 mA output which is proportional to actuator position.
Actuator Part Numbers
8405-009
ProAct III (MS connector), CW to max.
8405-010
ProAct III (conduit), CW to max.
8405-011
ProAct III (MS connector), CCW to max.
8405-012
ProAct III (conduit), CCW to max.
8405-013
ProAct IV (MS connector), CW to max.
8405-014
ProAct IV (conduit), CW to max.
8405-015
ProAct IV (MS connector), CCW to max.
8405-016
ProAct IV (conduit), CCW to max.
Driver Box
Operating Temperature Range
–40 to +70 °C (–40 to +158 °F)
Storage Temperature Range
–55 to +105 °C (–67 to +221 °F)
Humidity
95% at 38 °C
US MIL-STD-810C, Method 507.1, Procedure II
SAE J1211, Paragraph 4.2.3
Shock
US MIL-STD-810C, Method 516.2, Proc. III
Power Supply
20 to 32 Vdc (24 Vdc nominal)
Current Requirements
10 A sustained
20 A available for two seconds
Actuator
Operating Temperature Range
–40 to +100 °C (–40 to +212 °F)
Storage Temperature Range
–55 to +125 °C (–67 to +257 °F)
Shock
US MIL-STD-810C, Method 516.2, Proc. IV
Vibration
US MIL-STD-810C, Method 514.2, Proc. VIII
Output Shaft
0.625-36 serrated (ProAct III)
0.750-48 serrated (ProAct IV)
Mass Moment of Inertia
ProAct III Actuator is 0.027 in-lb-sec²
ProAct IV Actuator is 0.058 in-lb-sec²
