31
Cutting
For chop cutting, slide the cutting head to the rear position as far as it will go, and lock the
carriage (1) by the lock handle (2).
Mitre cut
Make sure the extension fence is secured in the correct position. Loosen the table clamp
knob and hold the table insert in the desired position. After the adjustment, tighten the table
clamp knob again. Turn on the switch and press the saw blade clamp knob to lower the cut-
ting head.
Bevel cut
Loosen the bevel lock handle and move the cutting head to the desired angle. Tighten the
bevel lock handle. Activate the switch, then press the blade guard lock lever to lower the cut-
ting head down.