29
-
When cutting longer pieces always use extension rails and insert clamps or other clamp-
ing devices for better grip.
-
Wear ear protection.
-
The operator station is in front of the machine.
-
Turn off the power tool if the blade gets stuck in the workpiece or the workpiece gets
wedged.
-
Keep the floor area free of loose particles such as wood chips and cuttings.
-
Make sure that the blade speed indicated on its label is at least as high as that of the saw
speed.
-
Use gloves when handling saw blades and rough materials.
-
Be sure to use only shims and spindle rings that are suitable for the purpose specified by
the manufacturer.
-
Caution: Do not remove cuttings or other parts of the workpiece from the cutting area
while the machine is running and the saw has not yet come to a complete stop.
-
Make sure that the machine is sitting securely before beginning to saw.
ADDITIONAL SAFETY INSTRUCTIONS FOR LASER LIGHT
The laser light and laser radiation used in this system comply with class 2 and 650 nm wave
length. Normally laser does not represent an optical danger, although staring into the beam
can cause flash blinding.
Caution:
Do not look directly into the laser beam, since this could
represent a risk.
Pay attention to the following safety instructions regarding laser:
-
The laser may only be used and maintained in accordance with the instructions of the
manufacturer.
-
Only point the beam onto the work piece, and never at a person or another object.
-
The laser beam must not deliberately be pointed at persons. It must not be pointed into
the eyes of a person for more than 0.25 seconds.
-
Always make sure that the laser beam is directed onto a robust work piece without a re-
flecting surface. That means that timber and materials with a rough surface are accepta-
ble. Shiny, reflecting plates or similar materials are not suitable for laser, since the reflect-
ing surface could return the beam to the operator.
-
Do not exchange the laser light unit for another type. Do not open the laser cover. Repairs
have to be conducted by the manufacturer or an authorised specialised company.
-
Caution:
You must only apply the regulation and adjustment tools and methods de-
scribed in this manual. Non-observance can lead to dangerous radiation.
OPERATION
Adjustments
This tool is accurately adjusted before shipping from the factory. Check the following accu-
racy and readjust if necessary in order to obtain the best results in operation. ATTENTION:
All the adjustment procedures illustrated below must be performed when the machine‘s en-
gine is off.