AVOID UNINTENTIONAL STARTING.
Do not carry a plugged-in tool with a finger on the switch. Ensure switch is off when plugging
it in.
WHEN OPERATING THE APPLIANCE OUTDOORS, ONLY USE EXTENSION CABLES SUITABLE
FOR OUTDOOR USE. CHECK THE EXTENSION CABLE FOR NECESSARY MARKINGS FOR
OUTDOOR USE.
ALWAYS STAY ALERT AND WATCH WHAT YOU ARE DOING.
Use common sense when operating the appliance. Do not use the appliance while you are
tired, sick or under the influence of alcohol, drugs, medication or other substances that
could affect your ability to react.
CHECK THE APPLIANCE FOR DAMAGES.
If you notice any damages in the appliance, in its guards or other parts, do not use it until it
has been repaired in an authorized service center. Check for alignment of moving parts, free
running of moving parts, breakage of parts, mounting and any other conditions that may
affect the appliance operation. Damaged parts should be properly repaired or replaced by
an authorized service center unless otherwise indicated in this instruction manual. Have de-
fective switches replaced by an authorized service facility. Do not use the appliance if the
switch does not turn it on and off.
USE ONLY ORIGINAL SPARE PARTS AND ACCESSORIES.
The use of any other spare parts or accessories than original parts may cause a risk of per-
sonal injury.
REPAIRS SHOULD ONLY BE CARRIED OUT BY AN AUTHORIZED SERVICE CENTER USING
ONLY ORIGINAL SPARE PARTS, OTHERWISE THIS MAY RESULT IN CONSIDERABLE DANGER
TO THE USER.
Safety instructions for band saw
-
Do not operate the machine until it is completely assembled and installed according to
instructions.
-
Before operating the machine, familiarize yourself with the controls and make sure you
know how to stop it quickly in case of emergency.
-
If you are not thoroughly familiar with operation of band saws, please obtain advice from
your supervisor, instructor or other qualified person.
-
Never switch on the machine before you have cleared the saw table of all objects (tools,
scrap pieces etc.).
-
Make sure
•
the voltage of the machine corresponds to the mains voltage.
•
to use an earthed power source (wall socket).
•
the cord and the plug are in perfect condition and not frayed or damaged in any way.
•
no saw teeth are missing and the blade is not cracked, distorted or otherwise dam-
aged. Replace damaged blade immediately.
•
the blade is properly tensioned and aligned.
22
