14
For Warranty information, please visit ElectroBraid.com
15
Continue unrolling the Braid
™
until you come to an end post where the strand will
terminate. End the strand by attaching it to the end post insulator just as you did when
you started the strand. Pull hard on the Braid
™
to remove as much slack as you can
before you apply the tensioning device. Clamp the ElectroBraid
®
to itself using a copper
poly rope splicer approximately 2” from the insulator.
Note: When installing fence on rolling terrain, tension all lines first before
attaching the Braid
™
to the dip and ridge posts.
Dip Post
Tension Kit Assembly
®
