-14-
Model W1834 (For Machines Mfd. Since 7/14)
SE
TU
P
Test.Run
To test run machine, do these steps:
1. Clear all setup tools away from machine.
2. Connect machine to power supply.
3. Turn machine
ON
, verify motor operation, and then
turn machine
OFF
.
The motor should run smoothly and without unusual
problems or noises.
Serious injury or death can result
from using this machine BEFORE
understanding its controls and related
safety information. DO NOT operate, or
allow others to operate, machine until
the information is understood.
DO NOT start machine until all
preceding setup instructions have
been performed. Operating an
improperly set up machine may
result in malfunction or unexpected
results that can lead to serious injury,
death, or machine/property damage.
Once you have mounted the grinder to the workbench,
test run the machine to ensure it is properly connected to
power and safety components are functioning properly.
If you find an unusual problem during the test run,
immediately stop the machine, disconnect it from power,
and fix the problem BEFORE operating the machine again.
The
Troubleshooting table in the SERVICE section of this
manual can help.
