-13-
OPERATION
Control Panel
The control panel enables you to manually turn the
air cleaner
ON
and
OFF
, and set the fan speed.
The panel has a remote control unit signal
receiver, a 5-ampere fuse for circuit protection,
and a series of LED lights that indicate your speed
and auto shut-off selections. See
Figure 12
.
Overview
When the Model W1690 Deluxe Ceiling Mounted
Air Cleaner is turned on, the fan motor starts on
HI
and then switches to the speed of your
selection. Air is drawn through the primary
filter, through the secondary filter, then the
cleaned air is distributed into your shop.
Figure 13.
Remote Control.
Figure 12.
Control Panel.
To operate the air cleaner unit, use the listed
controls:
•
OFF:
Allows you to manually turn the air
cleaner
OFF
.
•
ON / SPEED:
Allows you to turn the unit
ON
with the first push of the button, and for
every additional push, the fan speed is
cycled from
LO
,
MID
, and
HI
. Speed
selection is indicated by a red LED light.
Remote Control
The remote control unit enables you to remotely
turn the air cleaner
ON
and
OFF
, set the fan
speed, and set the auto shut-off time. The remote
control unit uses two AAA alkaline batteries as a
power source. The remote control unit must be
within 75 feet and have an unobstructed infrared
signal path to the control panel in order to control
the air filter. See
Figure 13
.
To operate the remote control unit, use the
listed controls:
•
OFF:
Allows you to remotely shut the air
cleaner off.
•
ON / SPEED:
Allows you to remotely turn the
unit
ON
with the first push of the button,
and for every additional push, the fan speed
is cycled from
LO
,
MID
, and
HI
.
•
TIME:
Allows you to set the auto shut-off
time from no auto shut-off, to auto shut-off
in 1 hour, 2 hours, and 4 hours.
NOTICE
ALWAYS take a few moments to listen and
observe for unusual noise and vibration after
starting the air cleaner.
OPERATION
