
-
4
-
READ.MANUAL.BEFORE.OPERATING.MACHINE
FAILURE.TO.FOLLOW.INSTRUCTIONS.BELOW.WILL.
RESULT.IN.PERSONAL.INJURY
1.. Thoroughly.read.the.instruction.manual.before.operating.your.machine..
Learn the applications,
limitations and potential hazards of this machine. Keep manual in a safe, convenient place for
future reference.
2.
Keep.work.area.clean.and.well.lighted..
Clutter and inadequate lighting invite potential hazards.
3.
Ground.all.tools..
If a machine is equipped with a three-prong plug, it must be plugged into a
three-hole electrical outlet or grounded extension cord. If using an adapter to aid in accommodat-
ing a two-hole receptacle, ground the adapter using a screw to a known ground.
4.
Wear.eye.protection.at.all.times..
Use safety goggles with side shields or safety goggles, meeting
the national safety standards, while operating this machine.
5.
Avoid.dangerous.environments..DO.NOT
operate this machine in wet or open flame environ-
ments. Airborne dust particles could cause an explosion and severe fire hazard.
6.
Ensure.all.guards.are.securely.in.place.
and in working condition.
7.
Make.sure.switch.is.in.the.“
OFF
”.position.
before connecting power to machine.
8.
Keep.work.area.clean;.
free of clutter, grease, etc.
9.
Keep.children.and.visitors.away..
All visitors should be kept at a safe distance away while operat-
ing unit.
10.
Childproof.your.workshop.
with padlocks, master switches, or by removing starter keys.
11.
Disconnect.the.machine.when.cleaning,.adjusting,.or.servicing.
Indicates an imminently hazardous situation which, if not avoided, WILL
result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided, COULD
result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided, MAY
result in minor or moderate injury and damage to the machine. It may
also be used to alert against unsafe practices.
This symbol is used to alert the user to useful information about proper
operation of the equipment.
NOTICE
SAFETY
Standard.Safety.Instructions
SAFETY
Summary of Contents for Shop Fox W1669
