manualshive.com logo in svg

Woodstock G9975, Instruction Manual, Page: 3 / 25

Share
Download
Woodstock G9975 Instruction Manual Download Page 3

-

2

-

INTRODUCTION

ABOUT YOUR NEW DUST COLLECTOR

This Shop Fox

®

Dust Collector has been specially designed by Woodstock International, Inc. to provide

many years of trouble free service. Close attention to detail, ruggedly built parts and a rigid quality con-
trol program assure safe and reliable operation.

The Model W1666 Dust Collector has the capacity to move approximately 1550 cubic feet of air and pro-
duce a static pressure of 12.3 inches of water column. The dust collection bags measure 19" X 33" and
have 5.4 cubic feet capacity. The W1666 is packaged with a 5" inlet, a 4" reducing “Y” and paddle switch
with removable safety key.

Woodstock International, Inc. is committed to customer satisfaction in providing this manual. It is our
intent to make sure all the information necessary for safety, ease of assembly, practical use and the
durability of this product be included. 

If you should have any comments regarding this manual, please feel free to contact us at:

Woodstock International, Inc.
P.O. Box 2309
Bellingham, WA 98227

WOODSTOCK SERVICE AND SUPPORT

We stand behind our machines! In the event that a defect is found, parts are missing or questions arise
about your machine, please contact Woodstock International Service and Support at 1-360-734-3482 or
at [email protected]. Our knowledgeable staff will help you troubleshoot problems, send
out parts or arrange warranty returns.

Summary of Contents for G9975


























Reviews:

No comments