GB / 23
Operation
Use only proper equipment.
• Do not force the machine or accessory not
to do the work of a larger industrial ma-
chine. It works better at the power rating
for which it was designed.
• Make all machine adjustments only with
the machine switched off.
• Never leave the machine unattended while
it is running.
• When switching off, leave the machine only
after it comes to a complete standstill.
• Turn the machine off before you unplug it.
• Always unplug the mains cord. Never pull
out the plug from the wall outlet by holding
the cable.
• Perform maintenance and cleaning of the
device regularly.
• Have the device checked, if necessary.
If you are not sure whether a working con-
dition is safe or unsafe, do not work with
the machine.
FEATURES FIG. 1
1
Handle
2
On / Off switch
3
Additional handle
4
Chuck locking
5
Tool holder
6
Oil fill opening
7
Maintenance tool
8
Point chisel
9
Flat chisel
10
Grease
m
Residual risks
The demolition hammer has been built in
accordance with the state of the art and
recognised safety standards. Neverthe-
less, individual residual risks can occur
when working.
• Risk of electric shock when using improper
mains supply cables.
• Furthermore, latent residual risks can per-
sist in spite of all measures adopted.
• Residual risks can be minimised if „safety
information“ and „proper use“ as well as
the operating manual are followed alto-
gether.
BEFORE GETTING STARTED
Make sure before starting that the data on
the type plate coincide with the mains speci-
fications.
Always disconnect the power supply before
making any adjustments to the device.
• Get to know your machine. Familiarise
yourself with its application and limitations,
as well as the specific potential hazards.
• Make sure that the switch is OFF before
inserting the plug into the socket.
• Make sure that the machine is assembled
completely and properly.
• Check the machine before use for dam-
aged parts and determine whether these
parts work properly and perform its intend-
ed function; in case of doubt, the part is to
be replaced.
• Check the alignment of all moving parts,
broken or mounting parts, and other con-
ditions that could impair proper operation.
Any damaged part should be repaired or
replaced by a qualified technician.
• Do not use the machine if a switch cannot
be switched on and off correctly.
Caution!
Before beginning the operation,
check the installation site for concealed
electrical cables, gas and water pipes using
a pipe locator.
Summary of Contents for 3908203952
