international 17
m
Use as authorized
The machine meets all valid EC machine guidelines.
•
The machine must only be used in technically perfect
condition and conscious of the risks, in accordance
with its designated use and the instructions set out in
the operating manual.
•
Any functional disorders, especially those affecting the
safety of the machine, must be rectified immediately.
•
The safety, working and maintenance instructions of
the manufacturer as well as the dimensions given in the
chapter „Technical data“ must be adhered to.
•
The relevant accident prevention regulations and other,
generally recognized safety-technical rules must also
be adhered to.
•
The machine may only be used, maintained, and oper-
ated by persons familiar with it and instructed in its
operation and procedures.
•
Arbitrary alterations to the machine release the manu-
facturer from all responsibility for any resulting dam-
ages.
•
The machine may only be used with original accesso-
ries and original tools supplied by the manufacturer.
Any other use exceeds authorization. The manufacturer
is not responsible for any damages resulting from un-
authorized use; risk is the sole responsibility of the
operator.
m
Remaining hazards
The machine has been built using modern technology in ac-
cordance with recognized safety rules. Some remaining haz-
ards, however, may still exist.
•
Noise can be a health hazard. If the permitted noise
level is exceeded when working, be sure to wear ear
protection.
•
The use of incorrect or damaged mains cables can lead
to injuries caused by electricity.
•
Even when all safety measures are taken, some remain-
ing hazards which are not yet evident may still exist.
•
Remaining hazards can be minimized by following the
instructions given in the chapters „Safety notes“ and
„Use as authorized“ as well as in the entire operating
Summary of Contents for 390 6106 000
Page 76: ...76 international...
Page 77: ...international 77...
Page 78: ...78 international...
Page 79: ...international 79...
