Issue 11.01.2012
Ref: WBM_MAN11-01-2012
3
Contents and packaging
Woodson
pack your product to limit any possible damage caused as a result of
transportation. Please unwrap the box carefully, and do not discard any packaging
without checking to ensure you have the following items:
a)
One bain marie
b)
Combination of pots as ordered (if applicable)
c)
One stainless steel cross bar - for dividing bain maries for pans
d)
One tap for draining water after daily use
Should any item have physical damage, report the details to the freight company and to
the agent responsible for the despatch within seven (7) days of receipt. No claims will
be accepted or processed after this period.
Installation
Remove all packing, plastic coating and tape from the stainless steel before installing
the machine. Clean off any remaining glue residue from the exterior of the machine with
warm soapy water (refer to cleaning instructions on page 5).
Place the machine on a level and firm work surface. Do not position the machine in a
wet area or near flammable substances.
Allow an air gap between the machine and other objects or surfaces. We recommend a
minimum gap of 100mm for normal operational use (if the machine is near any heat
sensitive material we suggest you allow additional space). Please consult national and
local standards to ensure that your machine is positioned in accordance with any
existing requirement.
Install the tap onto the body of the unit.
Plug the bain marie into the appropriate power point.
