Page 8
www.stoddart.com.au
Specifi cation
Setting Up
Improper installation, adjustments, alterations, service or maintenance can cause property damage, injury or death.
Handling
•
Use suitable means to move the appliance: eg. A lift truck or fork pallet trucks (the forks should reach more than halfway beneath
the appliance)
Unpacking
•
Check the appliance for damage before and after unpacking. If unit is damaged, contact the distributor and manufacturer
•
Should any item have physical damage, report the details to the freight company and to the agent responsible for the dispatch
within seven (7) days of receipt. No claims will be accepted or processed after this period
•
The appliance is supplied fully assembled.
•
Remove all protective plastic fi lm, tapes, ties and packers before installing and operating.
•
Clean off any remaining residue from the interior exterior of the appliance using a clean cloth dampened with warm soapy water.
Important!
When hard wired, ensure that a qualifi ed technician
sets up and installs this unit.
Electrical Supply
•
Unit should be plugged into an appropriately rated electrical supply in accordance with the instructions and technical
specifi cations contained in this manual.
Positioning
•
Choose an area that is well ventilated and that provides access for future maintenance.
•
Place the appliance on a level stable work surface capable of supporting its weight.
•
Do not position the unit in a wet area, an area with a lot of heat and steam or near infl ammable substances.
•
Allow an air gap between the appliance and other objects or surfaces. We recommend a minimum gap of 100mm for normal
operational use (if the appliance is near any heat sensitive material we suggest you allow additional space)
•
Please consult national and local standards to ensure that your appliance is positioned in accordance with any existing
requirement
•
Do not stack the units on top of each other.