Rev 7.2/4-21
MRT4-DC3: #35068
17
T
O
A
TTACH
THE
P
ADS
TO
A
L
OAD
Make sure the contact surfaces of the load and vacuum pads are clean (see
Positioning the Lifter on the Load
1A
Center the pad frame on the load
(fig. 1A).
1
1)
2A
Make sure all vacuum pads
will fit on the load and will
be loaded evenly (fig. 2A).
Consult the Per-Pad
Load Capacity.
2) Place the vacuum pads in
contact with the load
surface.
1..... The lifter is designed to handle the maximum load weight when the load’s center of gravity is positioned within 2" [5 cm] of the lifter’s rotation
axis. Uncentered loads may rotate or tilt unexpectedly (as applicable).
OPERATION
