BA_WP_KSM9-3000-200-3100-150_EN_22-22.docx
33
10.6
Using the Cylindrical Sanding Unit
10.6.1
Preparing the Cylindrical Sanding Unit
Figure 27: Sanding cover
Figure 28: Side table height
Figure 29: Side turntable height
•
Switch off the main switch (
1
) and secure it by locking it.
•
Remove the two handle screws (
G
) and take off the sanding cover (
B
) as shown in
•
Stow the cover and the two handle screws in a suitable place.
•
Loosen the clamping lever (
K
) and adjust the desired working height of the side table:
→
For version KSM9-3000/200 see
→
For version KSM9-3100/150 see
Note the increased risk of cutting/abrasion due to the exposed sanding belt on the drum!
After finishing the cylindrical sanding work, refit the sanding cover (B).
•
On version KSM9-3000/200, the cylindrical sanding unit is now ready for use.
•
For version KSM9-3100/150, further settings are required on the revolving turret head (see
10.6.2
Adjusting the Revolving Turret Head
The cylindrical sanding unit of the KSM-9 3100/150 model is equipped with a revolving turret head
3
with three
different sanding drums. Due to the different drum diameters (60, 100 and 120 mm), curves and other round
sanding operations can be carried out even more flexibly.
Figure 30: Cylindrical sanding components
The side table, which can be folded up to a 45° position, is equipped
with a turntable that can be adapted to the drum diameter.
Changing the drum diameter see section
Pos. Description
R
Turret head with sanding drums Ø 60, 100 und 120 mm
T
Fold-out side table top (self-locking)
D
Turntable with 3 recesses for drum fix positions
B
Locking bolt for unlocking the folded-up side table
Remark:
The side table plate (
T
) as well as the locking mechanism of the turntable (
D
) have been correctly ad-
justed at the factory. If the side table top (
T
) has become misaligned after prolonged use and is no longer hori-
zontal, it can be readjusted using two screws. If the turntable (
D
) no longer engages properly, there is also an
adjustment screw for this.
Details on this can be found in section
“Maintenance and Inspection”
.
3
For constructional reasons, the rotary star turret is only available for model KSM9-3100/150.
G
B
K
K
T
D
R
B