11
a)The torque wrench and endo wrench can be disinfected by neutral non-
corrosive disinfector for cleaning and sterilizing, or be sterilized in high
temperature and pressure.
b) The following sterilization ways for torque wrench are forbidden:
①
Braise in liquor;
②
Dip in iodine, alcohol or glutaraldehyde;
③
Torrefy in oven or microwave oven.
Notice: We are not responsible for any damage of the torque wrench directly
or indirectly made by any way in the above items.
3.4 Cleaning of tips, endocuck
,
torque wrench and endo wrench
The scaling tip
,
endochuck
,
torque wrench and endo wrench can be cleaned by
ultrasonic cleaner.
3.5 Trouble analysis , solutions and notes
3.5.1 Trouble analysis and solutions
Solutions
Possible causes
Phenomena of troubles
The scaling tip doesn't
vibrate and there is no
water flowing out when
getting through the
electricity.
Contact our dealers or us
The fuse of transformer
is broken
Insert the foot switch
to its socket tightly
The foot switch
is in loose contact
Make the plug insert
to the socket well
The power line plug
is in loose contact
Dismantle the handpiece and
send it to our company to repair
Contact our dealers or us
Something wrong
with the cable
Something wrong
with the handpiece
The connect plug between
the handpiece and the circuit
board is in loose contact
Contact our dealers or us
Screw the tip on the
handpiece tightly (picture 5 )
The tip is in loose contact
The scaling tip doesn't
vibrate but there is water
flowing out when getting
through the electricity
The fuse in the main
unit is broken
Contact our dealers or us
Turn on the water control switch
【
note 1
】
Contact our dealers or us
The water system is blocked
There is impurity in the
electric-magnetic valve
The water control switch is
not on
The scaling tip vibrates
but there is no spray
when getting
through the electricity
Clean the water line by
three-way syringe
【
note2
】
