5. Install Hinged Doors
Fire Station Doors are hinged to swing
inward. Glue in place carefully.
• Position Front Wall
1
facedown.
• Set Door
8
onto backside of Front
Wall. Make sure the hinge pins are in
the grooved openings (Fig. 5a).
• Position Door Support
6
in groove and
on top of hinge pins to hold Door
8
in
place (Fig. 5b). Glue Door Support in
place, being careful to not get glue on
hinged area or door will not swing.
• Set Door
9
hinge pins into grooved
openings on backside of Front Wall.
Position Door Support
7
into groove
and on top of hinge pins, then glue in
place.
• Install second set Doors in the same
manner (Fig. 5c).
7. Attach Tower Assembly
• Insert Tower Assembly into
cutout in Front Wall at a slight
angle (Fig. 7a).
• Push Tower Assembly down,
inserting locking tabs into
notches on Front Wall. Snap
firmly into place (Fig. 7b). Apply
glue on inside tabs.
4
Fig. 5b
Fig. 5a
Fig. 5c
6
8
6
8
6
8
Fig. 7a
6. Assemble Tower
• Insert three locking tabs on Tower Wall
11
into notches on Front
Tower Wall
10
(Fig. 6a).
• Snap Back Wall
12
onto Tower Wall
11
(Fig. 6b).
• Align locking tabs on Tower Wall
13
with Front Tower Wall and Back
Wall and snap into place.
• Apply glue on tabs and
inside seams.
6
Fig. 6b
Fig. 7b
Fig. 6a
11
10
12
11
1
8
8
9
9
7
7
6
6
8
6
8
