WC68 Operator’s Manual
2. UNPACKING
A. UNBOXING THE CRATE
Unpack the contents of the crate by first cutting the nylon strapping and then remove the cardboard
top and sides. Use a 13 mm socket/wrench to remove the four (4) M8 hex bolts and nuts located at
each bottom corner of the crate and then lift it off the skid. Discard the crate.
Remove all the loose components from the skid (infeed chute panels, control arm, edge bar, control
arm linkage, discharge chute, PTO shaft, hardware boxes) and set them to the side. Use the
tractor’s 3-point hitch system to lift the wood chipper off the skid and set it on the ground. Discard
the skid.
WC68-MY2019: Rev A
Page
of
14
49
27-Sep-2018
Remove M8 bolts
from each corner
