2
ATTACH SIDES & TRACKS
Install a washer
(WS002)
on twelve 1-1/4” bolts
(HB040)
. Insert the bolts thru the holes shown in the pair
of phenolic sides
(6000S)
and start an oval nut
(5760B
- smooth side first)
on the ends of the bolts. The sides
should look like mirror images of each other when done.
Slide a 9-1/4” Double Track
(4009)
and a 6”
Double Track
(4006)
onto the oval nuts located near the
long edges of each side. Position the tracks even with
the end and edges of each side and tighten the bolts.
Lay the 24” Double Tracks/Router Plate on
a flat surface and slide the two sides/oval nuts at
the back of the sides on to the two tracks. Square
the tracks to the sides, adjust the tracks flush to the
bottom of the sides and tighten the four bolts.
There is an extra set of mounting holes in the Phenolic
Sides
(6000S)
which allow you to elevate the 9-1/4”
Double Tracks
(4009)
& Table
(6000T)
3/4”. This
extra table height may be desirable depending on
the how you have the Angle-Ease plate mounted.
HB040 x12
WS002 x12
5760B x12
600
0S
- Sid
es
400
9
400
6
