3. SPECIFICATIONS
3.1 MAIN COMPONENTS
1. Tension adjustment knob. This feature controls the amount of blade tension. Proper blade tension is important to make
accurate cuts.
2. Upper hinged door lock knob. Gain access to blade.
3. Upper blade guide assembly . The blade guides support the blade and prevent it from twisting during operation. An
adjustment is necessary when the blade is changed or replaced.
4. Tilting table.
5. Lower hinged door lock knob. Gain access to blade.
6. Main On/Off switch.
7. Rip fence. Use as a support guide for ripping operations.
8. Dust port. This feature helps eliminate sawdust from inside the machine. A 1-1/4” vacuum hose or dust collector
adaptor can be used for optimal sawdust removal.
9. Bevel scale pointer. The bevel scale shows the degree to which the table is tilted for bevel cutting.
10. Upper blade guide lock knob. Loosen this knob before adjusting blade guide height.
11. Upper blade guide adjust wheel. The upper blade guide assembly should be lowered to just above the workpiece
while cutting. Always adjust and then lock it by tightening the upper blade guide lock knob before turning on the bandsaw.
12. Blade tracking lock knob. Locks the blade tracking adjustment.
13. Blade tracking adjust handle. This adjust handle should be adjusted to maintain proper blade tracking and locked
using the blade tracking lock knob.
-6-
1
2
3
4
5
6
7
8
9
10
11
12
13
