WOODENTIMES QUARTUS, Manual

Page: 27 / 37

27
PENDULUM
To increase the bob weight use
the ⌀45mm washer. Before you
glue together put plenty of
glue in the pocket of one half,
this will prevent the washer
from rattling.
Hammer a coupling into the Bob
Adjust 44C. Fit the tenon into
the back of the bob. Pay atten-
tion to the grub screw orienta-
tion as this will allow you to
loosen the grub screw from the
side. If you wish to treat the
bob, you will find this easier
if you glue the bob adjust af-
terwards.
Hammer a coupling into the
Pivot 41C and screw in both
⌀3mm/10mm brass screws.
Glue 2 40A parts to the back
and front of the dial, do not
use too much glue, otherwise
you will have problems gluing
in the brass rods