PRODUCT FEATURES
AND
CODE APPROVAL
•
This appliance has been certified
for use with either natural or
propane gas. See appropriate data
plates.
•
This appliance is not for use with
solid fuels.
•
The appliance is approved for bed-
room or bedsitting room installa-
tions.
•
This appliance is mobile home
•
The appliance must be properly
connected to a venting system.
•
The appliance is not approved for
closet or recessed installations.
PRODUCT SPECIFICATIONS
approved.
•
The installation must conform
with local codes or, in the absence
of local codes, with the National
Fuel Gas Code, ANSI Z223.1/
NFPA54 in U.S.A., or the Natural
Gas and Propane Installation Code,
CSA B149.1 in Canada.
4
5
Figure 1 - Fireplace
LISTED VENTED GAS FIREPLACE HEATER
Direct Vent type appliances draw all combustion air from outside of the dwelling through the vent pipe.
CODE APPROVAL
FIREPLACE HEATERS in the USA and Canada as follows:
These appliances have been
listed
by OMNI and found to comply with the established standards for DIRECT VENT GAS
This appliance may be installed in an aftermarket, permanently located, manufactured home
(USA only) or mobile home, where not prohibited by local codes.
This appliance is only for use with the type of gas indicated on the rating plate.
This appliance is not convertible for use with other gases, unless a certified kit is used.
TESTED TO: ANSI Z21.88-201
4
/CSA 2.33-2014, CGA 2.17-M91 (R2009), CSA P.4.1-
15
STANDARDS
