PG
9
OF
20
An ongoing program of product improvement may require us to change specifications without notice.
woodstonehome.com
[email protected]
tf. 800.578.6836
f. 360.734.0223
Wood Stone Corporation
1801 W. Bakerview Rd.
Bellingham, WA 98226 U.S.A.
M0325.00
Rev. November 2020
Installation
Professional Series Grill Installation and Operation Manual
UNLOADING THE PROFESSIONAL SERIES GRILL
Under no circumstances should manual unloading be attempted. If a receiving dock is available, a pallet jack
should be sufficient to remove the crated unit from the delivery truck. The use of a forklift (2,000 lb.) is sug-
gested when moving the unit from the delivery truck to ground level.
SACRIFICIAL HEAT SHIELD
Install at rear of firebox.
FLASHING (COUNTERTOP MODELS ONLY)
Follow instructions below.
REV:
DATE:
PART #:
WS-SFB-57-CT
General Arrangement
Installation Illustrations
3/7/2013
bena
3
DWN BY:
SHEET:
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF WOOD STONE CORPORATION
ANY REPRODUCTION OR USE IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF WOOD STONE IS PROHIBITED
An ongoing program of product improvement may require us to
change specifications without notice.
Bellingham, WA 360/650-1111 www.woodstone-corp.com
DIMENSIONS ARE IN INCHES
TOLERANCES: LINEAR ±1/2 [±10mm], ANGULAR ±2°
UNLESS NOTED OTHERWISE
1 of 1
\\woodstone.net\dfs\CAD\0 Pn\WS Top Level\WS-SFB-CT_Flange_Install_Detail-0.dft
Seal bottom edge of flashing
to counter using high-temp
silicone (provided).
Seal any gap between the flashing and
the charbroiler using the high-temp
silicone (provided).
Using the hardware provided, install the
stainless steel flashing to the front and
back of the charbroiler.
Install Sacrificial Heat
Shield as Shown
Sacrificial Heat Shield
Flashing
REV:
DATE:
PART #:
WS-SFB-57-CT
General Arrangement
Installation Illustrations
3/7/2013
bena
3
DWN BY:
SHEET:
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF WOOD STONE CORPORATION
ANY REPRODUCTION OR USE IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF WOOD STONE IS PROHIBITED
An ongoing program of product improvement may require us to
change specifications without notice.
Bellingham, WA 360/650-1111 www.woodstone-corp.com
DIMENSIONS ARE IN INCHES
TOLERANCES: LINEAR ±1/2 [±10mm], ANGULAR ±2°
UNLESS NOTED OTHERWISE
1 of 1
\\woodstone.net\dfs\CAD\0 Pn\WS Top Level\WS-SFB-CT_Flange_Install_Detail-0.dft
Seal bottom edge of flashing
to counter using high-temp
silicone (provided).
Seal any gap between the flashing and
the charbroiler using the high-temp
silicone (provided).
Using the hardware provided, install the
stainless steel flashing to the front and
back of the charbroiler.
Install Sacrificial Heat
Shield as Shown
Sacrificial Heat Shield
Flashing
Using the hardware pro-
vided, install the stainless
steel flashing to the front
and back of the grill.
Seal bottom edge of flash-
ing to counter using high-
temp silicone (provided).
Seal any gap between the
flashing and the grill us-
ing the high-temp silicone
(provided).
Install Sacrificial Heat
Shield as shown.
Sacrificial Heat Shield
Flashing