PG
6
OF
20
An ongoing program of product improvement may require us to change specifications without notice.
woodstonehome.com
[email protected]
tf. 800.578.6836
f. 360.734.0223
Wood Stone Corporation
1801 W. Bakerview Rd.
Bellingham, WA 98226 U.S.A.
M0325.00
Rev. November 2020
Cautions & Warnings (Cont'd.)
Professional Series Grill Installation and Operation Manual
INSTALLATION IN A ROOFED AREA
If installed within an outdoor structure incorporating a roof, a suitable, non-combustible means of
capturing the heat and smoke from the grill and exhausting it safely above the roof structure is required.
The venting system must be suitable for high temperature solid fuel applications. It may also require a fan
suitable for high temperature solid fuel applications. The venting system must include an approved spark
arrestor device at the outlet above the roof. The venting system will typically incorporate a metal corro-
sion resistant hood suitable for high temperatures and overhanging all sides of the appliance sufficiently
to capture the smoke and heat coming off of the appliance. The appliance may also be placed within a
masonry structure designed to capture the heat and smoke and incorporating a chimney to
discharge the exhaust safely above the roof structure. The venting system must be designed and installed
by a qualified installer/contractor. We recommend you consult with a fireplace or HVAC professional
experienced with solid fuel applications. The venting system must be designed, installed and maintained
in accordance with all applicable local codes and regulations. In the absence of local codes, relevant Na-
tional Codes shall be referred to.
When using the appliance out in the open, beware that sparks and embers can become airborne in the
course of operating the appliance. To avoid risk of fire, only operate the appliance in a safe area where
sparks or embers cannot land on vegetation, other flammable materials, or structures. Never use this
appliance when a burn ban is in effect, and always observe any burning restrictions that may be in place in
your area. Use common sense and be extremely cautious when conditions are dry and/or windy.
If installing in an area prone to wind, it is highly recommended that a non-combustible wind screen be
constructed to minimize the effects of the wind while using the appliance.
Keep a fire extinguisher in an easily accessible location near the appliance.
This unit must be installed and used in accordance with all applicable local codes and regulations.
Install only on a non-combustible surface extending 36 inches in all directions beyond the grill. Clearance
to all combustible materials from front, sides and back of the grill is 36 inches.
The grill must be installed on a solid level surface, capable of safely supporting the weight of the grill.
DO NOT INSTALL THIS APPLIANCE INDOORS
Please read this entire manual before you install the appliance. Failure to follow instructions may result in
property damage, bodily injury or even death. Contact your local building or fire officials about restrictions
and installation inspection in your area. All installations subject to the approval of the local authority
having jurisdiction.
