manualshive.com logo in svg

Wood Stone vashon, Installation And Operation Manual, Page: 5 / 30

Share
Download
Wood Stone vashon Installation And Operation Manual Download Page 5

5

An ongoing program of product improvement may require us to change
specifications without notice. 

WS-IS-VA-CT, Revised July 2013

[email protected]

 

or visit 

woodstone-corp.com

wood stone corporation

1801 w. bakerview rd.
bellingham, wa 98226 usa

tf. 800.988.8103
t. 360.650.1111
f. 360.650.1166

Vashon Installation and Operation Manual

caUtIons & WaRnInGs

save the InstRUctIons

WaRnInG: 

This product must be installed by a licensed plumber or gas fitter when installed within the Commonwealth 

of Massachusetts.

Wood Stone’s Vashon Oven has been tested and approved by Intertek Testing Services 

and are ETL Listed to ANSI/UL 197, CSA C22.2, ANSI Z83.11b-2009/CSA 1.8b-2009 

and to ANSI/NSF Standard 4 - 2009. 

this appliance is for professional use by qualified personnel� this appliance must be installed by qualified 
persons in accordance with the regulations in force� this appliance must be installed with sufficient 
ventilation to prevent the occurrence of unacceptable concentrations of substances harmful to health in 
the room in which it is installed� this appliance needs an unobstructed flow of fresh air for satisfactory 
combustion and must be installed in a suitably ventilated room in accordance with current regulations� this 
appliance should be serviced by qualified personnel at least every 12 months or sooner if heavy use is 
expected�

!

a MaJoR caUse of oven RelateD fIRes Is a 

faIlURe to MaIntaIn ReqUIReD cleaRances 

to coMbUstIble MateRIal. It Is of UtMost 

IMPoRtance that thIs oven be InstalleD onlY 

In accoRDance WIth these InstRUctIons.

DISCONNECT POWER TO THE OVEN BEFORE SERVICING OR CLEANING.

NO ATTEMPT SHOULD BE MADE TO OPERATE THIS APPLIANCE DURING A POWER FAILURE

Summary of Contents for vashon































Reviews:

No comments