Wood Stone vashon, Installation And Operation Manual, Page: 15 / 30

15
An ongoing program of product improvement may require us to change
specifications without notice.
WS-IS-VA-CT, Revised July 2013
Info@woodstone-corp.com or visit woodstone-corp.com
wood stone corporation
1801 w. bakerview rd.
bellingham, wa 98226 usa
tf. 800.988.8103
t. 360.650.1111
f. 360.650.1166
Vashon Installation and Operation Manual
the seRvIce MenU
• READy RANGE +:
the two ready range functions maintain a
regulated temperature range to allow for consistent cooking� set the
maximum temperature that the oven will maintain during operation�
the default setting is 20 °f�, which means that on a preheat setting of
450 °f, this range would be 450–470 °f)�
•
READy RANGE - : set the minimum temperature that the oven will
maintain during operation� the default setting is 20 °f�, which means
that on a preheat setting of 450 °f, this range would be 430–450 °f)�
settInGs anD oPtIons UnDeR the seRvIce MenU
PRGM / seRvIce / oPtIons scReen
from the options screen you can change basic settings of the oven�
IMPORTANT NOTE:
we strongly suggest
NOT
making any
changes to settings on this page unless directed by wood stone�
press the prgM (program) button on the controller keypad, then the arrow key next to service, then the arrow key next to
options�
(
Note:
after you select service, you will be prompted to enter you password, if you have a password assigned� enter
the password using the circular touchpad, then press the save button on the controller keypad�)
change values by pressing the arrow to the right of the value, then scroll through values using the circular touchpad�
• GLOW TIME
: the time allowed for the upper element to reach full temperature� the glow time is set at the factory and we
recommend that this setting not be changed�
• kEy CLICk : controls whether or not there is a sound associated with pressing a button on the touchpad� set to “on” for sound
and “off” for no sound�
•
STARTUP TEMP : set the preheat temperature using this function�
• DEGREES : use this function to set the oven control to display temperatures in “f” for fahrenheit or “c” for celsius�
scroll using the circular touchpad or hit the button to the right of the
desired category, i�e� products, Menus, systeM or all, to highlight
it, then hit enter in the center of the circular touchpad� the screen will
flash, and the category settings will be returned to factory settings�
PRGM / seRvIce / DefaUlts scReen
from the default screen you can reset current settings back to the factory settings for a single category: products, Menus,
systeM or all�
press the prgM (program) button on the controller keypad, then the arrow key next to service, then the arrow key next to
defaults�
( Note: after you select service, you will be prompted to enter you password, if you have a password assigned� enter
the password using the circular touchpad, then press the save button on the controller keypad�)