SLAB-MIZER AUTO FEED INSTALLATION
Form 2452
3 of 18
Publication 2/17/21
Tools Needed
Decals
4
Hardware
#10-24x ½ Screws
4
#10 Flat Washer
4
#10-24 Nuts
4
6mmx20 Bolts
4
6mm Locknuts
4
6mm Flat Washer
4
3/16” Cable Clamp
6
Step drill bit
1
Small flat-tip screwdriver-
1
12mm Flat Washer
2
Cable ties
1
Necessary only if your unit does
not
have the version with mounting hole
.
Drill
Small flat screwdriver
Phillip Screwdriver
3/8” wrench
Pliers
17mm wrench
Wire cutters
Wire Stripper and/or utility knife
Adhesive tape
Description
Quantity
Slab-Mizer
Automatic
ARC FLASH AND SHOCK HAZARD
Reorder #S20061
Hazardous voltage inside disconnect box,
starter box, and at electric motor can cause
shock, burns, or death. Disconnect and lock
out power supply before servicing! Keep all
electrical component covers closed and
securely fastened during machine
operation. Wear appropriate Personal
Protection Equipment.
Failure to do so will result in severe
personal injury.
STOP!
Always wear eye, ear,
respiration and foot
protection when
operating this machine.
Failure to do so may
result in injury.
Reorder #S11753
STOP!
Read and understand operator’s
manual and all safety
instructions before setting up,
operating or maintaining this
machine.
Failure to do so may result in
injury, death or equipment
damage.
Reorder #016402
