Setup and Operation
Two-person operation
Setup and Operation
doc011422
3-7
3
9. Operator 1:
With the pallet at a slight angle to the blade, push the pallet half way through
the blade.(See Figure 3-4.)
DANGER!
Keep hands 12” away from the blade. Failure to do so
will result in death or serious injury.
NOTE:
Move the pallet from side-to-side as you push or pull to
ease the cut.
10. Operator 2:
Pull the pallet completely through the blade.
11. Operator 2:
Turn the pallet over and place it on the pass back bars.
12. Operator 1:
Place the pallet on the table and against the fence.
13. Operator 1:
With the pallet at a slight angle to the blade, push the pallet half way through
the blade.
14. Operator 2:
Pull the pallet completely through the blade.
15.
Either operator
: Turn off blade.
DANGER!
Remove power before clearing debris or any other
maintenance activity. Failure to do so will result in death or serious
injury.
16. Operator 2:
Clear lumber and debris from the table to make it ready for the next pallet.
17.