SETUP & OPERATION
Additional, fifth cutter (MP365 Moulder only).
EGdoc071420
3-24
3
ADUSTING OF THE ADDITIONAL CUTTER.
Function description of the handles and cranks.
A - Cutter tilting crank. One full revolution of the crank tilts the cutter by 3,6
o
B- Cutter tilting lock handle. Must be loosen before tilting the cutter.
C - Cutter tilting lock. Must be released before tilting the cutter.
D - Cutter height crank.
E - Cutter height lock handle. Must be loosen before moving the cutter up or down.
F - Cutter left-right crank. One full revolution of the crank moves the cutter left or right by 4mm.
G - Cutter left-right lock handle. Must be loosen before moving the cutter left or right.
H - Cutter drive belts tension handle.
I - Drive belt tension locking handle.
See figure 3-22.
FIG. 3-22
A
E
F
G
D
H
I
B
C
