Setup
Install the clutch cable
3-30
LX25 4/8/21
Setup
3
1.
Place the latch hook into the top center of the saw head with the fasteners provided.
2.
Slide the scale through the bracket on the mast with the scale facing the operator, as
shown in step
.
3.
Open and latch the sawhead cover in the open positions.
4.
Loosely
secure the sawhead with M8-1.25x20 carriage bolts (inserted from the inside of
the sawhead, as in the cut-away view, with washers and nuts on the exterior, as shown in
step
5.
Slide the anti-vibration blocks onto both sides of the scale, as shown in step
.
FIG. 3-25
Bolt, M8-1.25x16
Latch Hook
Washer, 8mm Split
Lock, ZN