Sawmill Setup
Stationary Sawmill Setup
3
3-2
HD-R04doc041910
Sawmill Setup
See Figure 3-1.
Before moving the saw carriage, remove the cable chain support
bracket.
1.
Disengage the rubber strap holding the cable chain to the support bracket.
2.
Loosen the handles and remove the support bracket from the sawmill track rail.
3.
Place the support bracket on the storage bracket located on the sawmill frame between
the first and second bed rails. Tighten the handles to secure the support bracket to the
storage bracket and secure the rubber strap in the bracket hole.
FIG. 3-1
Store chain support on
bracket between first
and second bed rails
3H0479
Remove strap
from cable chain
Loosen handles
and remove
chain support
