Sawmill Alignment
Complete Alignment Procedure
7
7-58
HD-R04doc041910
Sawmill Alignment
Optional Board Return Bracket
Adjust the board return bracket so the bottom edge is positioned 1/4" below the bottom of
the blade.
1.
With a square cant on the bed rails, lower the blade until it touches the top of the cant.
Then raise the saw head 1/4" as shown on the scale.
2.
Lower the board return arm. The board return bracket should barely touch the top of the
cant.
3.
Loosen the three bracket mounting bolts to adjust the bracket up or down as necessary.
See Figure 7-48.
FIG. 7-48
Bracket
Mounting
Bolts (3)
3H0432
