Setup & Operation
Board Return
Setup & Operation
30Sdoc120507
2-12
2
Install the table at the front of the sawmill bed with the outrigger toward the loading side of
the sawmill.
See Figure 2-7.
Be sure the edge of the table seats in the slot on the bed frame and the
table tab seats in the leg bracket. Lower the outrigger and adjust it until it is firmly planted
on the ground.
Store the pins by placing one pin in the hole under the table. Loop the second pin through
the retainer of the first pin and lock.
FIG. 2-7
Place table edge in provided
tabs and lower into operating
position.
3H0436B
