Maintenance
Miscellaneous Maintenance
Maintenance
doc022219
4-4
4
See Figure 4-3.
4.8
Miscellaneous Maintenance
1.
Check the drive belt tension after the first 20 hours, and every 50 hours thereafter. See Section 6.13
for more informations.
2.
Check the mill alignment every setup. See Section 6, Alignment)
3.
Make sure all safety warning decals are readable. Remove sawdust and dirt. Replace any damaged
or unreadable decals immediately. Order decals from your Customer Service Representative.
4.9
Safety Devices Inspection (CE version only)
Sawmill with electric blade drive motor – Safety Devices Inspection
Safety devices on the LT15SA/LT15 sawmill which must be checked before every shift:
E-STOP button and its circuit inspection
Safety handle and its circuit inspection
Blade cover safety switches and its circuit inspection.
1. E-STOP button and its circuit inspection
Press and hold the safety handle;
Turn on the blade motor;
FIG. 4-3
Loosen the
nut
50
