Sawmill Operation
Up/Down Operation
Sawmill Operation
1597doc111810
4-8
4
3. Rev. A.00 - A.01:
Turn the up/down lock counterclockwise until it disengages the
up/down shaft.
Rev. B.00+:
Pull the up/down lock out and rotate until the roll pin handle
locks in the out position.
4.
Pull back on the crank handle to engage the locking pins for up/down operation.
5.
Turn the up/down crank clockwise to raise the saw head, counterclockwise to lower the
saw head.
6. Rev. A.00 - A.01:
Turn the up/down lock clockwise until it engages the up/down shaft.
Rev. B.00+:
Rotate the up/down lock to allow the spring-loaded pin to engage the
up/down sprocket.
CAUTION!
DO NOT try to force the carriage above the 27"
(68 cm) mark or below the 1" (2.54 cm) mark. Damage to
the up/down system may result.
FIG. 4-5 UP/DOWN CRANK (REV. B.00+)
Pull crank handle
back to engage
up/down drive
Turn crank clockwise to
raise saw head;
counterclockwise
to lower saw head
Up/Down
Lock Pin
150051-3
