Sawmill Assembly
Bed Section Assembly
8
8-5
1597doc111810
Sawmill Assembly
See Figure 8-5.
LT15BS
Rev. B.00+
Insert the splice pins into the holes in the track rail and secure with two 3/8-16 x 1” hex
head bolts.
See Figure 8-6.
TIP:
The threaded holes at the end of the splice are provided to help remove the splice if
you wish to disassemble the sawmill. Remove the two splice bolts from the middle holes
and thread into the end holes. Evenly turn the bolts clockwise to push the splice pins out
of the track rail holes.
FIG. 8-5
FIG. 8-6
Splice
3/8-16 x 1"
Hex Head Bolt (2)
150069-1
Loosen bolt if
necessary to adjust
alignment of recess
150070B
Thread bolts in end
holes to remove
splice
3/8-16 x 1"
Hex Head Bolt (2)
Splice