32
WOODMASTER OUTDOOR FURNACES • OWNER'S MANUAL
5. TEMPERATURE ALARM AND ITS DURATION
5.1 HOW TO SEE THE ALARM DURATION AND MAX (MIN) TEMPERATURE
If the alarm LED is on, an alarm has taken place.
To see the kind of alarm, the max (min) reached temperature and alarm
duration do as follows:
1. Push the UP or DOWN key.
2. On the display the following message is shown:
"HAL" for high temperature alarm ("LAL" for the minimum alarm),
followed by the Maximum (minimum) temperature. Then the "tiM"
(tiMe) message is displayed, followed by the "Duration" in h.mm.
3. Then the instrument displays the temperature once again.
NOTE1: if an alarm is still occurring the "tim" shows the partial duration.
NOTE2: the alarm is recorded when the temperature comes back to normal
values.
5.2 HOW TO RESET A RECORDED ALARM OR ONE THAT IS STILL OCCURRING
1. Hold the SET key pressed for more than 3s, while the recorded alarm is
displayed (the rSt message will be displayed).
2. To confirm the operation, the "rSt" message starts blinking and the
normal temperature will be displayed.
6. MAIN FUNCTIONS
6.1 HOW TO SEE THE SETPOINT
Push and immediately release the SET key - the display will show the Set
point value; Push and immediately release the SET key or wait for 5 seconds
to display the probe value again.
